Reversing camera
The picture behind the car on the screen as soon as you reverse.
More about the reversing cameraParking sensor installation
Cannot see how close you are when parking? We fit sensors that beep faster and faster as you approach a wall, a pillar or another car.
Send us the make, model, year and city.
We work in several cities in Serbia. Tell us your city.
Rear, front or both?
Rear, 4 sensors They switch on by themselves in reverse.
Front, 4 sensors They switch on with a button or the brake.
Both, 8 sensors They warn you at the front and at the rear.
Not sure what fits your car? Send us the make, model and year.
What will the bumper look like?
Black or silver
They fit almost any car.
In the colour of the car
They are barely noticeable.
Like factory ones
They do not stick out of the bumper.
With holes in the bumper
- We make the hole with a tool of the exact size for that sensor, not bigger.
- First we score the paint, so the paint around the hole does not chip.
- Before drilling we check what is behind the bumper.
No drilling: a strip on the inside
- It cannot be seen from outside.
- It works only on a plastic bumper. It does not work on a metal one.
- It warns while the car is moving towards an obstacle. So park slowly and steadily.
How do they warn you?
With sound
The closer you are, the faster it beeps.
With a display
It shows how far away you are.
On the car screen
For some cars, we check by model.
The car already has factory sensors, but the screen does not show them? On some cars we switch the display on by coding.
Want the picture behind the car too? In one US study, cars with a camera and sensors had 42% fewer reversing crashes than cars with neither. More about reversing cameras
How much do parking sensors cost
Sensors, fitting and testing in one price
The price depends on the kit, the car and the way of fitting. We tell you the price when you send the make, model and year.
- Payment
- cash or through a company
What sensors do not always see
- Low and thin obstacles. A thin pole, a low kerb and what is right under the bumper.
- A small child behind the car. The sensors can miss them.
- So look around the car even with sensors.
How we fit parking sensors
- 1
You send the car model
Send us the make, model, year and city. Tell us whether you want rear, front or both, and how they should warn you.
- 2
We tell you which kit fits and what it costs
We fit them only when you agree.
We choose the sensors by the car and the bumper.
The price depends on:
- Rear, front or both: 4 or 8 sensors.
- What the sensors look like and whether the bumper is drilled.
- Only sound, a display or the car screen.
- Whether we paint the sensors and remove the bumper.
- Whether a reversing camera goes with the sensors.
- 3
We mark the spots and look behind the bumper
We place the sensors at the spacing the kit asks for, so they look straight back or forward. Before drilling we check there is no metal bracket behind the spot.
- 4
We fit the sensors and connect them
We paint colour-matched sensors in thin coats and fit them once the paint is dry. We put the electronics box in a dry place in the car. We put the speaker or display where you can hear and see it.
- 5
We test every sensor
We approach every sensor with an obstacle. The beeping must speed up and, at the end, not stop. We put a removed bumper back only when all sensors work.
So the sensors warn you properly
- Keep them clean. Snow, ice, mud and salt cause beeping for no reason.
- Wipe them with a soft cloth, warm water and car shampoo.
- If one sensor keeps beeping even when it is clean, get in touch.
Questions before fitting
How much does parking sensor installation cost?
The price depends on the kit, the car and the way of fitting. The price includes the sensors, fitting, painting if you want it and a test of every sensor. We tell you the price when you send the make, model and year.
My car is older?
A kit with its own speaker goes in.
I have a tow bar or a spare wheel at the back?
We set the sensors so they do not warn about them.
I carry a bike behind the car?
We check your carrier.
Can the bumper crack from drilling?
The wrong tool can make a crack. That is why we make the hole with a tool of the exact size for that sensor and score the paint first. If you do not want holes, we fit sensors without drilling.
Do you remove the bumper?
For a factory look we remove the bumper. With a universal kit we sometimes remove it, to see what is behind the bumper before drilling.
Do the sensors beep in the rain?
In heavy rain they sometimes beep without an obstacle. The same on grass, an uneven road and uphill.
What happens to the sensors when I replace the bumper?
In a new bumper we make new holes of the exact size and fit the sensors in them. Call before replacing the bumper, we will tell you what your car needs.
Related services
Reversing camera with monitor
A camera at the back and a monitor over the mirror or on the dashboard, for a car without a screen.
More about the camera with monitor
Coding
We switch on features your car already has.
More about coding
Auto electrician
The sensors your car already has beep for no reason or stay silent? We find which sensor or cable does not work.
More about the auto electrician