Parking sensors
They tell you with sound how close you are to an obstacle.
More about parking sensorsReversing camera with monitor installation
Your car has no screen? We fit a camera at the back and a monitor over the mirror or on the dashboard. The picture appears by itself as soon as you reverse.
Send us the make, model, year and where you want the monitor.
We work in several cities in Serbia. Tell us your city.
Where do you want the monitor?
Over the mirror Nothing stands on the dashboard. The factory mirror stays, we clip the monitor over it.
The car has a screen Camera on your screen
You want CarPlay too Multimedia and camera
Tell us where you want the monitor.
What do you see on the monitor?
From the seat you cannot see what is low and close behind the car: a post, a kerb, a child. The camera shows exactly that part.
- The picture behind the car, as soon as you reverse.
- Parking lines. They are approximate, so we set them by a kerb or a parking space line.
- You adjust the brightness, contrast and colour of the picture on the monitor. We show you how.
What does the camera not see?
The camera does not see the whole area behind the car. On the picture an object does not always look at its real distance. So before reversing, look in the mirrors too.
How much does a camera with monitor cost
Camera, monitor and fitting in one price
Kits and cars are not the same, so there is no single price. We tell you the price when you send the make, model, year and where you want the monitor.
- Payment
- cash or through a company
What you get
- A camera at the back
- A monitor over the mirror or on the dashboard
- The picture turns on by itself in reverse
- Parking lines
How we fit the camera
We suggest a kit and a price, then fit and check it.
- 1
You tell us where you want the monitor
Send us the make, model and year of the car. Tell us whether you want the monitor in the mirror or on the dashboard.
- 2
We suggest a kit and a price
We fit it only when you agree.
We tell you which camera and monitor kit suits your car.
The price depends on:
- Where the monitor goes and how big the screen is.
- A kit with a cable or a wireless one.
- Where the camera goes: above the plate, in the plate frame or in the bumper.
- How long the car is and where the cable runs.
- Whether the camera needs a separate power line.
- 3
We try the camera position
Before drilling we fit the camera temporarily and look at the picture. We look for a spot from which the bumper and the ground behind the car are visible.
- 4
We run the cable and connect the power
The cable runs under the trim. Where it passes through metal, we fit a rubber grommet. We connect the monitor to the ignition, not straight to the battery. We protect the joints and check the camera works. If the power on the reversing light flickers while the engine runs, we power the camera another way.
- 5
We check with the engine running
We check the picture does not flicker and the radio has no noise. We set the lines and show you how to adjust the picture.
Where does the camera go?
Most often above the plate or in the plate frame. We fix the frame to the holes the plate already has. For a camera in the bumper we drill a hole in the bumper.
The plate stays visible, because the regulations ask for it. We point the camera slightly down, so the picture shows more ground and less sky. When there is a lot of sky in the picture, the whole picture goes dark in the sun.
Do you drive a van without a rear window?
There the rear-view mirror shows nothing. For a van there is a mirror monitor that shows the picture behind while you drive forward too, not only in reverse.
On a van the camera can also go in the third brake light, high above the doors.
With a cable or wireless?
With a cable kit we run the cable from the camera to the monitor under the trim, so it cannot be seen.
A wireless kit has no cable for the picture. A power cable still goes to the camera and to the monitor. Which kit suits your car, we tell you when you send the make, model and year.
How do you keep the picture clear?
- Wipe the camera with a damp cloth. No alcohol, petrol, acetone or thinner.
- Do not point a pressure washer at the camera. Water can get into it.
- In winter rinse the salt off the camera as soon as you can. Over time salt damages the housing.
- Do not wax the camera.
Questions before fitting
How much does a reversing camera with monitor cost?
There is no single price, because kits and cars are not the same. The price includes the kit, fitting, set-up and checking. What the price depends on is in the fitting steps.
Can the monitor go on the dashboard?
Yes. A dashboard monitor stands on a bracket, not on a suction cup.
Does the camera work at night?
Yes. At night the reversing light lights the picture, and sometimes it is not enough. For that there are cameras with their own lighting. Tell us if you often park in the dark.
Do you drill the car for the camera?
For a camera in the bumper we drill a hole in the bumper. We fix a plate frame with a camera to the holes the plate already has.
Can the monitor replace the mirror?
No. By regulation a car with 4 or more seats must have an inside mirror and an outside mirror on the left. That is why we clip the monitor over the factory mirror, which stays in the car.
Does the camera mirror also record the drive?
There are also kits that record the drive. If you want recording too, say so when we talk, so we can check which kit and fitting we can offer.
Can I bring a kit I bought?
Send us the car model and the name of the kit. Before we agree, we check whether the kit suits the car and whether we can fit it.
Can I have parking sensors with the camera?
Yes. Parking sensors tell you with sound how close you are to an obstacle.
Related services
Reversing camera
Your car has a screen? The picture goes on the screen the car already has.
More about the reversing camera